Hygger Aqua Sense Aquarium LED Light
Hygger Aqua Sense Aquarium LED Light - 30CM - 18W is pre-ordered, confirm stock before ordering!
Pickup available at Jungle Aquatics
Usually ready in 2 hours
Hygger Aqua Sense Aquarium LED Light - 30CM - 18W is pre-ordered, confirm stock before ordering!
Description
Description
Hygger Aqua Sense Aquarium LED Light
The Hygger Aqua Sense Aquarium LED Light is an adjustable full-spectrum aquarium LED light with a built-in smart display and water monitoring, designed for freshwater planted tanks. It combines custom colour control, a daily lighting cycle and a supplied sensor probe in one fixture, so you can light your fish and plants and keep an eye on water readings from the same unit.
Key Benefits
- Four independent lighting channels (white, red, green and blue) let you tune the light to your fish and aquatic plants.
- Eight preset colours and ten brightness levels make it quick to set the look you want.
- Three operating modes (IDLE, TIMER and 24/7) suit anything from constant lighting to a gradual, natural-style daily cycle.
- A 2.8" (7.1 cm) TFT display lifts automatically when it senses you within approximately 80 cm (31"), then shows live water readings from the included probe.
- The probe displays temperature, total dissolved solids (TDS), electrical conductivity (EC) and salinity on the screen.
- The aluminium housing dissipates heat, and the extendable brackets fit both rimmed and rimless tanks.
- Motor and sensing settings can be adjusted to suit your setup.
How to Use
- Choose the variant that matches your aquarium length, then position the light on the tank using the two extendable mounting brackets.
- Place the probe in the water and secure it with the supplied suction cup. The probe cable is approximately 0.5 m (20") long.
- Use IDLE mode for continuous lighting, TIMER mode for scheduled operation, or 24/7 mode for a gradual sunrise, daylight, sunset and moonlight cycle.
- Customise the T1/T2 settings and night lighting so the light follows your own aquarium routine.
- The fixture is splash-resistant, but keep the light and the display out of the water.
- Check that the brackets are stable once fitted, and avoid overextending the supports.
Suitable For
- Freshwater aquariums.
- Planted aquariums, where adjustable colour channels and brightness help you match the light to your plants and fish.
- Hobbyists who want lighting control and basic water-parameter monitoring in a single unit.
Compatibility
- Extendable brackets accommodate both rimmed and rimless tanks.
- Each variant is matched to a range of tank lengths, listed under Available Sizes.
- The power adapter accepts AC 100–240V input, which covers South African mains supply.
Specifications
- Model: HGY0007
- Display: 2.8" (7.1 cm) TFT, lifts automatically when you are within approximately 80 cm (31")
- Lighting channels: four (white, red, green and blue)
- Colour presets: eight
- Brightness levels: ten
- Modes: IDLE, TIMER and 24/7 (sunrise, daylight, sunset and moonlight cycle)
- Water readings: temperature, TDS, EC and salinity
- Housing: aluminium, for heat dissipation
- Adapter input: AC 100–240V
- Probe cable: approximately 0.5 m (20")
- Splash-resistant design
Available Sizes
Select the variant for your aquarium length:
- 30 cm – 18W: for tanks approximately 30–45 cm long; light body 27.5 cm; 810 lumens
- 45 cm – 24W: for tanks approximately 45–60 cm long; light body 42.5 cm; 1,095 lumens
- 60 cm – 30W: for tanks approximately 60–75 cm long; light body 57.5 cm; 1,375 lumens
- 75 cm – 42W: for tanks approximately 75–90 cm long; light body 72.5 cm; 1,885 lumens
- 90 cm – 48W: for tanks approximately 90–105 cm long; light body 87.5 cm; 2,218 lumens
- 120 cm – 60W: for tanks approximately 120–140 cm long; light body 117.5 cm; 2,480 lumens
What's Included
- LED light
- Power adapter
- Water quality sensor probe
- Two mounting brackets
- Probe suction cup
- User manual
Frequently Asked Questions
How do I choose the right size for my tank?
Match the length of your aquarium to the tank range listed for each variant under Available Sizes. For example, the 60 cm – 30W variant is for tanks approximately 60–75 cm long. The light body is slightly shorter than the variant name, and the extendable brackets span the tank.
What water readings does the probe show?
The included freshwater probe lets the display show temperature, total dissolved solids (TDS), electrical conductivity (EC) and salinity. The probe cable is approximately 0.5 m (20") long and attaches with the supplied suction cup.
Will it fit a rimless aquarium?
Yes. The extendable brackets accommodate both rimmed and rimless tanks. Check that the brackets are stable once fitted and avoid overextending the supports.
What is the difference between IDLE, TIMER and 24/7 modes?
IDLE gives continuous lighting and TIMER runs the light on a schedule. 24/7 mode runs a gradual sunrise, daylight, sunset and moonlight cycle. You can also customise the T1/T2 settings and night lighting.
Can I run it on South African mains power?
The power adapter accepts AC 100–240V input, which covers South African mains supply.
Can the display or light get wet?
The design is splash-resistant, but the fixture and display must be kept out of the water. Only the probe goes into the aquarium.
Shipping
Shipping
When can I expect delivery?
- Gauteng (Jhb/Pta) - 1-3 working days
- Nationwide (Cpt/Dbn+) - 2-5 working days
- Outlying Areas - 3-7 working days
All orders are sent via Economy Road, typically through Fastway or Internet Express Couriers*. Estimated timeframes are not guaranteed. Once the order is collected by the courier, we have no control over third-party logistics and cannot make any time promises.
If you prefer a faster 🚀 shipping option, we also offer The Courier Guy during checkout in the dropdown selection. Please note that this option is not free, and you must choose it to use it. Please pay careful attention to the cutoff times and delivery timeframe for these options during checkout.
Bob Box & PUDO Lockers
Bob Box & PUDO Lockers
Enjoy the convenience of collection points and lockers! 📦
No more waiting at home or at work for your delivery. Simply choose a collection locker or pickup point and collect your order when it suits you.
Delivery times to lockers and pickup locations typically range from 2–7 working days, depending on your location.*
Search a PUDO Location Near You
Collection timeframes:
- Bob Box: Collect within 2 days of receiving your collection notification.
- PUDO Lockers: Collect within 36 hours of receiving your collection PIN or SMS notification.
If a PUDO parcel is not collected within 36 hours, it will automatically be transferred to the nearest PUDO Kiosk or Depot at no additional cost. The parcel will then be held there for approximately 2 days before being returned.
Please ensure you collect your parcel within the applicable collection period. Uncollected parcels will be returned to the sender, and additional shipping charges may apply should the order need to be resent.



















