Hygger Curved Aquarium Kit

Hygger Curved Aquarium Kit

Unique 3D Background Design
The 3D background for an 8-gallon fish tank creates an enchanting underwater dream world. It is an ideal resting place, play area, and shelter for small fish. Additionally, you can adorn the ‘Rocky Mountains’ with green grass to enhance the natural ambience.

3 Modes LED Light
Its aquarium LED light offers 3 distinct lighting modes: White LEDs, a combination of Blue+White+Red LEDs, and Red+Blue LEDs.

It operates at a voltage/power of DC 12V/18W. The extendable brackets allow you to adjust the length from 0 to 19 inches to fit the tank sizes. With the external digital controller, you can set the lighting duration for 3, 6, or 12 hours and adjust the brightness from 100% to 10% across 5 levels.

Durable Power Filter
The built-in aquarium power filter is designed for 2 to 8 gallons. This ultra-quiet and durable filter is ideal for low water levels. It features a 2-stage filtration system at the top and a water pumping system at the bottom to circulate water upwards.

Please note: This filter might be too powerful for fish smaller than 2 inches. If your tank contains small fish, it is advised to either wrap the filter bottom with filter floss/sponge or reduce the power of the filter.

New-view Curved Tank
This 8-gallon glass fish tank features a distinctive convex arc curve design, expanding your viewing perspective of the aquarium and allowing for a greater water capacity. The tank has a total volume of 8 gallons, though it can only hold 6 gallons of water due to the presence of an attached 3D background decoration. When filled with water, the tank weighs approximately 68 pounds.

Multi-protection Packing
We take great care in packaging the aquarium kit using a triple-layer protection method. The innermost layer is a highly durable poly foam that provides excellent cushioning. To ensure the safety of your glass tank during transit, we’ve conducted shipping tests by sending samples to various locations and found that the tanks arrived in perfect condition. Therefore, you can be confident that your tank will not break during shipping.

Usage Tips

Follow the tank setup steps below

1. Clean the Tank and Filter: Clean the tank and filter with clean water and towels. Avoid using chemicals not designated for aquarium use.

2. Position the Tank: Place the tank on a stable, flat surface in your chosen location, away from direct sunlight and air drafts.

3. Decorate the Tank: Rinse the gravel and decorations, then arrange them in the tank before adding water to prevent overfilling.

4. Add Water: Fill the tank with room-temperature tap water treated with an aquarium conditioner to neutralize chlorine.

5. Set Up the Filter: Rinse the power filter cartridge, assemble it, and attach the power filter to the preformed hole using the suction cups.

6. Install the LED Light: Properly position the extended LED light on the tank.

7. Power On: Connect the LED light and power filter to a power source and switch them on.

Tips for A Successful Aquarium

1. LED Light Usage: Limit the LED light to a maximum of 8 hours per day to simulate a natural environment.

2. Water Changes: Replace 25% of the water weekly to maintain water quality.

3. Water Level: Maintain the proper water level to ensure the efficient operation of the power filter.

Specifications:

Tank Capacity: 8Gal (30L)
Material: Glass (4mm)
Dimensions: 48.3 x 30 x 24.4
Light: DC12W 18W Blue White and Red
Filter Pump" 7W, 416L/H