⚠️ PLEASE NOTE: This is a PRE-ORDER item. Confirm stock availability with the store BEFORE placing your order!

Neptune PMUP v2 Practical Multi-Purpose Utility Pump

Name: Neptune PMUP v2 Practical Multi-Purpose Utility Pump
Brand: PRE ORDER
SKU: 019962174155
Price: 1138.00 ZAR
Availability: InStock

SKU: 019962174155

R 1,138⁰⁰

Neptune PMUP v2 Practical Multi-Purpose Utility Pump is pre-ordered, confirm stock before ordering!

PRE-ORDER T&Cs

Please note that Neptune PMUP v2 Practical Multi-Purpose Utility Pump is a special-order item and may not be immediately available. We recommend completing the stock confirmation form before finalizing your order to ensure availability and avoid disappointment.

Pre-ordered items are not eligible for returns. Please be certain before purchasing, as we cannot accept returns for these special-order items.

DELIVERY

Pre-ordered items depend on supplier availability and typically take 2-5 working days to arrive if the item is in stock with the supplier. Orders are shipped only after receipt and cannot be partially fulfilled. Certain pre-ordered items cannot be shipped and must be picked up in-store. These items will display a warning message on the page and during checkout.

Stock Confirmation

Get notified when this item is back in stock

Neptune PMUP v2 Practical Multi-Purpose Utility Pump

R 1,138.00

⚠️ Note: If you've submitted multiple requests recently, please wait 15-30 minutes before trying again due to spam protection.

✅

Request Sent Successfully!

Thank you! We've received your stock request and our team will check availability.
You'll receive an email confirmation shortly with the next steps.

📧 We'll send your request through to our team to confirm stock availability

✅

GOOD NEWS! This item appears to be in stock at our store!

However, we still recommend sending a stock request to confirm availability and reserve your item.

⚠️ IMPORTANT: Only proceed to PRE-ORDER below once you have heard back from us confirming stock availability!

Description

Neptune PMUP v2 Practical Multi-Purpose Utility Pump

Neptune PMUP v2 Practical Multi-Purpose Utility Pump is designed for various aquarium tasks, including auto top-off and running reactors for bio-pellets, carbon, and GFO, with the capability to pump water up to 14 feet vertically.

The PMUP v2 is a multi-purpose pump that can be used for many different tasks on your aquarium. The redesigned PMUP now includes valuable features over the previous version, allowing it to be maintained with the removable screen but the PMUP will also now automatically shut off when it detects that it is running dry, but also over temperature protection.

Perfect for:

Auto Top Off
Carbon Reactors
GFO Reactors
BioPellet Reactors
Ideal for Salt or Freshwater

Auto-Top-Off (ATO)

ATO will likely be the most popular use for this pump. And unlike many wimpy pumps out there, the PMUP has enough pressure to push water up 14 feet vertically, it can even move the water up from one floor below.

This means you could put your RO water storage in your basement or downstairs in a utility room and it could still pump it up to the tank.

It also has a vertically oriented design with a bottom intake and top output that is perfect for use in jugs or other RO containers. Just drop it in!

Run your reactors safely and with less energy

The PMUP is not just for ATO. It is also a great pump to use for running your various reactors bio-pellets, carbon, GFO, or even the two-stage combo unit from BRS you see here. The PMUP uses less than 20W of power so it is a very efficient way to run reactors and adds very little heat to your aquarium. We’re certain there will be many other uses found for the PMUP we’ve not even considered yet.

Removable Screen makes for easy cleaning and maintenance

Many inexpensive ATO pumps are not designed to be maintained. It’s almost as if they were meant to be disposable. But the PMUP has an easy to remove screen that keeps out foreign objects and also makes it easy to clean and maintain the pump

Easy to connect with standard tubing and fittings

The PMUP Has a smooth, 3/8″ (9.5mm) output that will easily connect to silicon tubing or standard push-fit connectors.

Specifications:

Dimensions - 4.58" H x 2.24" Diameter
Max Flow - 100 GPH
Max Head - 14'
Power Consumptions - 17w

What's Included?

1x PMUP v2 Multi-purpose Utility Pump (power supply not included)

Note - Requires Apex (any model and a 1Link module or EnergyBar832 with available DC24V Accessory Port. If you do not have an Apex Controller, check out the PMUP with Power Supply.