Resun LP-60 High Pressure Air Compressor

Resun LP-60 High Pressure Air Compressor

Resun LP-60 High Pressure Air Compressor is a quiet, high-output air pump for aerating fish ponds, koi ponds, aquaponics and hydroponic systems. It suits pond keepers and growers who need a large volume of air to keep fish and plants supplied with oxygen.

Why Aeration Matters

Adding oxygen to a pond is important for fish health, particularly in densely stocked koi ponds and during the summer months, when oxygen levels decline. Fish tend to become visibly more active in an oxygen-rich pond. In aquaponics, oxygen supports both the fish and the plants. The same applies to the plants in a hydroponic system.

Key Benefits

• Delivers a maximum air output of 4200 L/hr (70 litres per minute), suitable for large fish and koi ponds and for hydroponic systems
• Very quiet, thanks to electromagnetic linear diaphragm technology
• Cast aluminium body
• Automatic thermal cut-out overload protection
• Rated IPX4, so it tolerates rain and light sprinkling when kept in a low-dust environment
• Supplied with a plastic 14 outlet manifold, so one pump can feed several air lines

How to Use

• Set the pump up above the water level.
• Keep it in a low-dust environment. It can withstand rain and light water sprinkling, but it should not be exposed to dust.
• Connect your air line to the manifold and run it to your airstones or air diffusers.
• Keep airstones and diffusers within a maximum water depth of 3.5 m (11.5 ft).

Suitable For

• Fish ponds and koi ponds
• Aquaponic systems and aquaponic aerobic mineralizers
• Hydroponic systems
• Natural swimming pond aeration
• Aquaculture pond aeration
• Wastewater treatment aeration
• Deepwater septic tank aeration
• Commercial and industrial water aeration

Compatibility

• The plastic 14 outlet manifold suits 4 mm (0.16") silicone air line.
• Works with airstones and air diffusers placed at depths of up to 3.5 m (11.5 ft).

Specifications

• Voltage / wattage: 240V / 60W
• Maximum air output: 4200 L/hr (70 litres per minute)
• Maximum pressure: 0.037 MPa
• Air pump outlet diameter: 20 mm (0.8")
• Cable length: 1.5 m (59")
• Ingress protection: IPX4
• Maximum water depth for airstones or diffusers: 3.5 m (11.5 ft)
• Pump dimensions: 245 mm (9.6") L x 205 mm (8.1") W x 210 mm (8.3") H
• Pump weight: 5.45 kg (12 lb)
• Cartoned weight: 6.3 kg (13.9 lb)

What's Included

• 1 x LP-60 high pressure air pump
• 1 x plastic 14 outlet manifold to suit 4 mm silicone air line

Frequently Asked Questions

How much air does the LP-60 produce?
It delivers a maximum air output of 4200 L/hr, which is 70 litres per minute, at a maximum pressure of 0.037 MPa.

Can I leave it outside in the rain?
It is rated IPX4, so it tolerates rain and light sprinkling. It should still be placed in a low-dust environment.

Can I put the pump below the water level?
No. The pump must be set up above the water level. Only the airstones or diffusers go in the water, to a maximum depth of 3.5 m (11.5 ft).

Is it noisy?
No. It is very quiet because it uses electromagnetic linear diaphragm technology.

What air line does the manifold take?
The supplied plastic 14 outlet manifold suits 4 mm silicone air line.

What happens if the pump overheats?
It has automatic thermal cut-out overload protection.

When can I expect delivery?

• Gauteng (Jhb/Pta) - 1-3 working days
• Nationwide (Cpt/Dbn+) - 2-5 working days
• Outlying Areas - 3-7 working days

All orders are sent via Economy Road, typically through Fastway or Internet Express Couriers*. Estimated timeframes are not guaranteed. Once the order is collected by the courier, we have no control over third-party logistics and cannot make any time promises.

If you prefer a faster 🚀 shipping option, we also offer The Courier Guy during checkout in the dropdown selection. Please note that this option is not free, and you must choose it to use it. Please pay careful attention to the cutoff times and delivery timeframe for these options during checkout.

Enjoy the convenience of collection points and lockers! 📦

No more waiting at home or at work for your delivery. Simply choose a collection locker or pickup point and collect your order when it suits you.

Delivery times to lockers and pickup locations typically range from 2–7 working days, depending on your location.*

Search a PUDO Location Near You

Collection timeframes:

• Bob Box: Collect within 2 days of receiving your collection notification.
• PUDO Lockers: Collect within 36 hours of receiving your collection PIN or SMS notification.

If a PUDO parcel is not collected within 36 hours, it will automatically be transferred to the nearest PUDO Kiosk or Depot at no additional cost. The parcel will then be held there for approximately 2 days before being returned.

Please ensure you collect your parcel within the applicable collection period. Uncollected parcels will be returned to the sender, and additional shipping charges may apply should the order need to be resent.