Seachem Alerts Combo

Ammonia Alert™ is an innovative color device for continuously detecting and monitoring toxic-free ammonia. A sensor changes reversibly from yellow to green to blue, relative to the ammonia concentration. No test kits, chemicals, or procedures are needed. The device detects less than 0.05 mg/L (ppm) free ammonia and alerts you to the #1 killer before any sign of stress. It lasts over a year. Marine or freshwater use.

In the absence of free ammonia, the unit will assume a yellow or faint yellow-green color. It is normal for the dry sensor to have a greenish hue. It may take up to a few days for a dry sensor to equilibrate with the water. No sampling of water, chemicals, or test procedures are required. The presence of the free ammonia is detectable continuously with a response time of about 15 minutes. Response to decreasing ammonia is slower, requiring about 4 hours to go from TOXIC to SAFE on removal of ammonia.

Ammonia Alert™ lasts over 9 times as long as competing products (over a year compared to 4-6 weeks). Ammonia Alert™ is also almost half the size of competing products. It's small, clear, and unobtrusive, so it won't detract from the view of your aquarium.

As little as 0.02 mg/L of free ammonia will produce a greenish hue on the detector surface. This corresponds to a total ammonia (both ionized and free ammonia) of 0.25 mg/L in marine water at pH 8.3. In freshwater at pH 7.0, this corresponds to 3.6 mg/L total ammonia. Free ammonia is much more toxic than ionized ammonia. As free ammonia, the ALERT color corresponds to about 0.05 mg/L, ALARM to about 0.2 mg/L, and TOXIC to about 0.5 mg/L. The ALERT concentration is tolerated for several days, ALARM for a few days, and TOXIC is rapidly harmful. This product is not recommended for use at acid pH

No care is required beyond removing algae with a clean, soft material. Avoid touching the sensor with your fingers, since skin oils can damage it. Do not use bleach, soap, detergents, or hard objects to clean the sensor. Some dye medications may discolor the sensor. Sensitivity improves with age, provided the unit is not allowed to dry out, however, drying does not permanently impair the unit. For maximum sensitivity, the unit should be read under natural daylight or daylight-simulating light. Red-enhancing light minimizes green and blue hues, decreasing the apparent sensitivity of the unit. The response of the unit may be checked by holding it briefly over the mouth of an ammonia bottle: color should develop rapidly.

pH Alert™ is a unique color device designed to be placed in the aquarium or filter and monitor pH continuously. A sensor changes color reversibly to alert you shifts to in pH levels between 5.8 and 8.2. No tests, no strips, just constant readings. Freshwater Only.

pH Alert™ lasts up to 4 times as long as competing products. pH Alert™ is also almost half the size of competing products. It's small, clear, and unobtrusive, so it won't detract from the view of your aquarium.

Simply place pH Alert™ visibly anywhere in the aquarium or filter. It’s that easy. No chemicals or test procedures are required. When first put in service, response time will be about 30 minutes. Thereafter, pH shifts will register within ten minutes.

When can I expect delivery?

• Gauteng (Jhb/Pta) - 1-3 working days
• Nationwide (Cpt/Dbn+) - 2-5 working days
• Outlying Areas - 3-7 working days

All orders are sent via Economy Road, typically through Fastway or Internet Express Couriers*. Estimated timeframes are not guaranteed. Once the order is collected by the courier, we have no control over third-party logistics and cannot make any time promises.

If you prefer a faster 🚀 shipping option, we also offer The Courier Guy during checkout in the dropdown selection. Please note that this option is not free, and you must choose it to use it. Please pay careful attention to the cutoff times and delivery timeframe for these options during checkout.

Enjoy the convenience of collection points and lockers! 📦

No more waiting at home or at work for your delivery. Simply choose a collection locker or pickup point and collect your order when it suits you.

Delivery times to lockers and pickup locations typically range from 2–7 working days, depending on your location.*

Collection timeframes:

• Bob Box: Collect within 2 days of receiving your collection notification.
• PUDO Lockers: Collect within 36 hours of receiving your collection PIN or SMS notification.
• Pargo Pickup Points: Collect within 5 days of arrival at the pickup location.

If a PUDO parcel is not collected within 36 hours, it will automatically be transferred to the nearest PUDO Kiosk or Depot at no additional cost. The parcel will then be held there for approximately 14 days before being returned.

Please ensure you collect your parcel within the applicable collection period. Uncollected parcels will be returned to the sender, and additional shipping charges may apply should the order need to be resent.