Bubble Magus QQ1 External Hang-On Back Protein Skimmer

Bubble Magus QQ1 External Hang-On Back Protein Skimmer

The Bubble Magus QQ1 External Hang-On Back Protein Skimmer is a compact hang-on-back protein skimmer that removes organic waste from aquariums up to 25 gallons (about 95 litres). It suits small to medium-sized home aquariums, especially sumpless setups with no room for a conventional in-sump skimmer.

Key Benefits

• Removes organic waste efficiently, supporting both the health and the appearance of your aquarium.
• Hang-on-back design, ideal for tanks that can't accommodate an in-sump skimmer.
• Sits on the edge of the aquarium with no magnets or brackets needed to hold it in place.
• Small footprint that blends into the aquarium backdrop without disrupting your aquascape.
• Included foam bubble trap helps stop micro-bubbles escaping into the display, keeping the water looking clear.
• Reliable needle-wheel pump for consistent performance.
• Easy to maintain: the collection cup and the skimmer body both disassemble quickly for cleaning and upkeep.

How to Use

• Hang the skimmer directly on the rim of your aquarium. No brackets or magnets are required.
• Check that your tank rim is no thicker than ⅝" (about 1.6 cm), the maximum the skimmer accommodates.
• Allow clearance for the skimmer to extend up to 8.5" (21.6 cm) above the rim.
• For routine cleaning, take the collection cup and skimmer body apart.

Suitable For

• Small to medium-sized home aquariums up to 25 gallons (about 95 litres).
• Sumpless aquariums and tanks where space is limited.
• Aquarists who want an easy-to-install skimmer that stays discreet in the display.

Compatibility

• Recommended for aquariums up to 25 gallons (about 95 litres).
• Fits tank rims up to ⅝" (about 1.6 cm) thick.

Specifications

• Recommended aquarium size: up to 25 gallons (about 95 litres)
• Dimensions: 5.8" L x 4.4" W x 10.5" H (14.7 x 11.2 x 26.7 cm)
• Maximum rim thickness: ⅝" (about 1.6 cm)
• Maximum height above rim: 8.5" (21.6 cm)
• Pump model: SP600 (needle-wheel)
• Power consumption: 8.5 Watts @ 120VAC, 60Hz
• Air draw: 120 LPH

What's Included

• 1 x QQ1 hang-on-back protein skimmer, 5.8" L x 4.4" W x 10.5" H (14.7 x 11.2 x 26.7 cm)
• SP600 needle-wheel pump
• Foam bubble trap

Frequently Asked Questions

Do I need a sump to run the QQ1?
No. It is a hang-on-back skimmer made for tanks without the capacity for an in-sump skimmer, including sumpless aquariums.

Does it need magnets or brackets to mount?
No. It hangs on the rim of the aquarium without either.

What size of aquarium is it designed for?
It is designed for aquariums up to 25 gallons (about 95 litres), which suits small to medium-sized home tanks.

What rim thickness will it fit?
It accommodates rims up to ⅝" (about 1.6 cm) thick. Measure your tank's rim before ordering.

How do I keep micro-bubbles out of my display?
The skimmer comes with a foam bubble trap, which helps prevent micro-bubbles from escaping into the aquarium.

Is it easy to clean?
Yes. Both the collection cup and the skimmer body can be disassembled quickly for cleaning and upkeep.

What is the power rating, and is it suited to South African mains?
The pump draws 8.5 Watts and is specified for 120VAC, 60Hz. That differs from standard South African mains supply, so confirm electrical compatibility before ordering.

When can I expect delivery?

• Gauteng (Jhb/Pta) - 1-3 working days
• Nationwide (Cpt/Dbn+) - 2-5 working days
• Outlying Areas - 3-7 working days

All orders are sent via Economy Road, typically through Fastway or Internet Express Couriers*. Estimated timeframes are not guaranteed. Once the order is collected by the courier, we have no control over third-party logistics and cannot make any time promises.

If you prefer a faster 🚀 shipping option, we also offer The Courier Guy during checkout in the dropdown selection. Please note that this option is not free, and you must choose it to use it. Please pay careful attention to the cutoff times and delivery timeframe for these options during checkout.

Enjoy the convenience of collection points and lockers! 📦

No more waiting at home or at work for your delivery. Simply choose a collection locker or pickup point and collect your order when it suits you.

Delivery times to lockers and pickup locations typically range from 2–7 working days, depending on your location.*

Search a PUDO Location Near You

Collection timeframes:

• Bob Box: Collect within 2 days of receiving your collection notification.
• PUDO Lockers: Collect within 36 hours of receiving your collection PIN or SMS notification.

If a PUDO parcel is not collected within 36 hours, it will automatically be transferred to the nearest PUDO Kiosk or Depot at no additional cost. The parcel will then be held there for approximately 2 days before being returned.

Please ensure you collect your parcel within the applicable collection period. Uncollected parcels will be returned to the sender, and additional shipping charges may apply should the order need to be resent.