Fraud Blocker
New arrival

Hygger 2 in 1 Aquarium Heater with Wave Maker

Discover the 2 in 1 aquarium heater with wave maker for efficient heating and circulation in your freshwater or saltwater aquarium.

Learn more


Regular price R 1,56500
Model

Pickup available at Jungle Aquatics

Usually ready in 2 hours

Interest-free payments available at checkout
Pay over 3 months 4 easy payments of each
Buy Now, Pay Over 6 Months 6 easy payments of each
SKU: 6009713258306

Description

Hygger 2 in 1 Aquarium Heater with Wave Maker

The Hygger 2 in 1 Aquarium Heater with Wave Maker is a submersible aquarium heater with a built-in circulation pump, designed for freshwater and saltwater aquarium keepers who want heating and water movement from a single compact unit. The HGY0009 can run the heater and pump together, or you can use either function separately, so you need fewer separate devices inside your tank.

Key Benefits

  • Heating and circulation in one device: the integrated pump moves water around the aquarium to help distribute heat and reduce stagnant areas.
  • Flexible operation: run the heater and pump together, or use the wave maker on its own when heating isn't needed.
  • Fewer devices in the tank: the combined design reduces the number of separate heaters and pumps you need to fit and hide.
  • External controller with a three-digit LED display: monitor both the current and set water temperatures at a glance, with the controller kept outside the water.
  • Simple button control: dedicated HEAT, SET and PUMP buttons give access to each function.
  • Multiple built-in protections: dry-run, overheat, low-temperature, motor obstruction and reverse protection (details below).
  • Corrosion-resistant heating element: made with 840 stainless steel, nickel-chromium heating wire and magnesium powder for heat transfer.

How to Use

  • Secure the heater and pump body inside the aquarium with the four suction cups. The controller stays outside the water.
  • Keep the submersible unit fully underwater whenever it is operating, and follow the supplied manual.
  • Use the HEAT, SET and PUMP buttons on the external controller to access the heating and pump functions.
  • To switch the display between Celsius and Fahrenheit, hold the PUMP button.
  • Check the electrical rating on your unit before installation.

Protective Features

  • Dry-run protection: stops the heater and pump when the unit is out of water, with an audible alert.
  • Overheat protection: stops heating when the water temperature exceeds 35°C. The pump continues running.
  • Low-temperature warning: sounds when the water drops below 15°C, while heating continues.
  • Motor obstruction and reverse protection: suspend pumping and heating, with automatic restart attempts.

Suitable For

  • Freshwater aquariums.
  • Saltwater aquariums.
  • Aquarium keepers who want heating and water circulation without adding a separate heater and pump.

Compatibility

Choose the model according to your aquarium volume and heating requirements. Room temperature and the difference between the ambient temperature and your target water temperature both affect heater performance. Recommended tank ranges for each model are listed under Available Sizes.

Specifications

  • Model code: HGY0009
  • Heating element: 840 stainless steel, nickel-chromium heating wire and magnesium powder for heat transfer
  • Display: three-digit LED on the external controller
  • Controls: HEAT, SET and PUMP buttons
  • Heater and pump body: approximately 187.6 × 70.9 × 108.2 mm (7.4 × 2.8 × 4.3")
  • External controller: approximately 66.8 × 29.4 × 121.3 mm (2.6 × 1.2 × 4.8")
  • Heater-to-controller cable: approximately 1.5 m (4.9 ft)
  • Controller-to-socket cable: approximately 1.2 m (3.9 ft)
  • Mounting: four suction cups

Available Sizes

  • 800W: manufacturer's recommended tank range of 80–220 US gallons, approximately 303–833 litres.
  • 1000W: manufacturer's recommended tank range of 130–260 US gallons, approximately 492–984 litres.

Care and Safety

  • Disconnect power before removing the unit from the aquarium or cleaning it.
  • Regularly clean the pump intake and heating area to prevent debris building up.
  • Keep the submersible unit fully underwater during operation.

What's Included

  • Wave heater
  • Mounting base
  • External controller
  • Four suction cups
  • User manual

Frequently Asked Questions

Can I use the wave maker without the heater switched on?
Yes. You can run the heater and pump together or operate either function separately, so the wave maker can be used on its own when you don't need heating.

Is it suitable for both freshwater and saltwater tanks?
Yes. It is suitable for both freshwater and saltwater aquariums.

Which model should I choose for my tank?
The range comes in 800W and 1000W. The manufacturer recommends 80–220 US gallons (approximately 303–833 litres) for the 800W and 130–260 US gallons (approximately 492–984 litres) for the 1000W. Also consider your room temperature and how far you need to raise the water above it, as both affect heater performance.

What happens if the water gets too hot or the unit runs dry?
If the water temperature exceeds 35°C, overheat protection stops heating while the pump keeps running. If the unit is out of water, dry-run protection stops both the heater and the pump and sounds an audible alert.

How do I change the display from Celsius to Fahrenheit?
Hold the PUMP button on the external controller to switch between the two units.

Does the controller go inside the aquarium?
No. Only the heater and pump body goes in the water, held by four suction cups. The controller stays outside, connected by a cable of approximately 1.5 m (4.9 ft), with a further cable of approximately 1.2 m (3.9 ft) running from the controller to the power socket.

Shipping

When can I expect delivery?

  • Gauteng (Jhb/Pta) - 1-3 working days
  • Nationwide (Cpt/Dbn+) - 2-5 working days
  • Outlying Areas - 3-7 working days

All orders are sent via Economy Road, typically through Fastway or Internet Express Couriers*. Estimated timeframes are not guaranteed. Once the order is collected by the courier, we have no control over third-party logistics and cannot make any time promises.

If you prefer a faster 🚀 shipping option, we also offer The Courier Guy during checkout in the dropdown selection. Please note that this option is not free, and you must choose it to use it. Please pay careful attention to the cutoff times and delivery timeframe for these options during checkout.

Bob Box & PUDO Lockers

Enjoy the convenience of collection points and lockers! 📦

No more waiting at home or at work for your delivery. Simply choose a collection locker or pickup point and collect your order when it suits you.

Delivery times to lockers and pickup locations typically range from 2–7 working days, depending on your location.*

Search a PUDO Location Near You

Collection timeframes:

  • Bob Box: Collect within 2 days of receiving your collection notification.
  • PUDO Lockers: Collect within 36 hours of receiving your collection PIN or SMS notification.

If a PUDO parcel is not collected within 36 hours, it will automatically be transferred to the nearest PUDO Kiosk or Depot at no additional cost. The parcel will then be held there for approximately 2 days before being returned.

Please ensure you collect your parcel within the applicable collection period. Uncollected parcels will be returned to the sender, and additional shipping charges may apply should the order need to be resent.